WAV vs MP3: what's the difference?
How the two formats differ in sound and size, what distributors and streaming services take, why converting an MP3 to WAV doesn't help, and which file to send at each stage of a project.
By David Reis, product designer & front-end engineer · Updated November 2026
What is a WAV file?
WAV is a container, almost always used for uncompressed audio. The Library of Congress's format description calls it a format "developed by Microsoft and IBM as part of the Resource Interchange File Format (RIFF)." Its usual encoding is LPCM, linear pulse-code modulation. The file holds every sample your DAW rendered, at the bit depth and sample rate you chose, and plays that audio back unchanged.
Apple's AIFF is the same idea in a different wrapper. A WAV and an AIFF of the same render sound identical.
What is an MP3 file?
MP3 is a lossy compression format, defined in the ISO/IEC 11172-3 and 13818-3 standards. The Library of Congress's MP3 description explains the trade-off: the encoder can "discard or reduce the precision of audio components that are less audible." Quiet detail under louder sounds and the very top of the frequency range go first. The lower the bitrate, the more goes.
The format has hard ceilings. The LAME encoder documentation lists MPEG-1 Layer III bitrates up to 320 kbps and sample rates of 32, 44.1 and 48 kHz. There's no 96 kHz MP3, and the format doesn't keep your 24-bit samples.
Is WAV better quality than MP3?
Yes, in the sense that matters for engineering: a WAV is the full signal, and an MP3 is an approximation of it. Whether you can hear the difference depends on the bitrate, the material and the playback. A 320 kbps MP3 of a dense rock mix on laptop speakers can be hard to tell from the WAV. A 128 kbps MP3 of a sparse acoustic track on good headphones is often audible to a trained ear: smeared transients, swirly cymbals, a narrower stereo image.
For anything where someone is judging the audio itself, such as mix notes, mastering decisions or approval, the MP3's artifacts are a problem. A client listening to an MP3 can comment on something that isn't in your mix. That's why review copies should be lossless; more in What is lossless audio?
WAV vs MP3 file size
The size difference comes straight from the data rate. An uncompressed file's bitrate is sample rate × bit depth × channels:
| Format | Bitrate | Per minute | 4-min song |
|---|---|---|---|
| MP3, 128 kbps | 128 kbps | ≈ 0.96 MB | ≈ 3.8 MB |
| MP3, 320 kbps | 320 kbps | ≈ 2.4 MB | ≈ 9.6 MB |
| WAV, 16-bit / 44.1 kHz | 1,411.2 kbps | ≈ 10.6 MB | ≈ 42 MB |
| WAV, 24-bit / 48 kHz | 2,304 kbps | ≈ 17.3 MB | ≈ 69 MB |
| WAV, 24-bit / 96 kHz | 4,608 kbps | ≈ 34.6 MB | ≈ 138 MB |
All figures are stereo, in decimal megabytes. A CD-quality WAV is roughly 11 times the size of a 128 kbps MP3 and about 4.4 times a 320 kbps one. 1,411 kbps is the figure distributors work to; TuneCore's file guide asks for "16 bit (sample size)", "44.1 kHz (sample rate)" and "1411 kbps (bit rate) stereo WAV files."
WAV has one size limit. Classic WAV stores its sizes in 32-bit fields, so a single file tops out at 4 GB, about 4 hours of 24-bit / 48 kHz stereo. Longer recordings use RF64 or BW64, extensions of WAV built for files past that limit.
Can you convert MP3 to WAV to improve quality?
No. Converting an MP3 to WAV writes the decoded MP3 into a WAV container. The file gets four to eleven times bigger and sounds exactly the same. The detail the encoder discarded isn't stored anywhere, so no converter can put it back. If a client or collaborator sends you an MP3 as a source file, ask for the original WAV.
Lossy encodes also stack. Decode an MP3, edit it and encode it to MP3 again, and the result carries the artifacts of both encodes.
What do distributors and streaming services want?
Distributors want lossless files, and the stores make their own compressed versions from them. TuneCore asks for 16-bit / 44.1 kHz stereo WAV, as above. Apple's Digital Masters program asks for high-resolution masters and handles the encoding itself, creating its own "256 kbps AAC encodes." Check your distributor's upload page for its exact formats and whether it takes higher resolutions.
What listeners hear depends on the service and the plan. Spotify's audio quality page lists compressed streams from about 24 kbps (Low) to about 320 kbps (Very high), plus a lossless setting "equivalent up to 24-bit/44.1kHz FLAC." Apple Music streams lossless "up to 24-bit, 48 kHz," and hi-res lossless up to 24-bit, 192 kHz. A WAV gives each store the best source to encode from. An MP3 means the store re-encodes an already lossy file.
Metadata: tags and artwork
MP3 has a well-established tagging system, ID3, which carries title, artist, album, artwork and more. The Library of Congress notes that "the lack of descriptive metadata motivated the producer community to develop ID3." WAV's metadata is patchier: it lives in optional chunks (LIST/INFO, and the broadcast bextchunk in BWF files), and support varies by app. Apple's Music app guide, for example, says "you must convert WAV files to another format before you can add artwork to them."
For releases that matters less, because distributors take metadata from the upload form. It does matter for files that travel on their own, so put the song title and version in the WAV's file name.
Which should you send: WAV or MP3?
| Situation | Send | Why |
|---|---|---|
| Mix or master for client review | WAV (or FLAC) | The client should judge the actual mix, without codec artifacts |
| Final approved mix to the client or label | WAV at the session's resolution | It's the deliverable; any conversion comes later |
| Mix to a mastering engineer | WAV at the session's resolution | Mastering needs the full-quality source |
| Upload to a distributor | WAV at your distributor's spec | Stores encode their own streaming versions from it |
| Stems | WAV, same length and start point | See our stems guide |
| Quick rough mix to a band chat or email | MP3, 320 kbps | Small enough for messaging apps and inboxes |
| Social clip or a site with an upload limit | MP3 or AAC | Size beats quality for a preview |
The hard part of sending WAVs is size: a 10-song album of 4-minute songs at 24-bit / 48 kHz is close to 700 MB. Email won't take it, and many chat apps compress audio sent as media. A link that streams the WAV in the browser solves both; there's a walkthrough in how to send mixes to clients. In Mixrounds, you upload the WAV (AIFF, FLAC, MP3 and M4A work too). Your client streams it in the browser and leaves timestamped comments, with no account to create.
Frequently asked questions
Is a 320 kbps MP3 as good as a WAV?
Close for casual listening, not identical. A 320 kbps MP3 is still lossy, it tops out at 48 kHz, and it doesn't keep your 24-bit samples. For mix review, mastering or distribution, send the WAV.
How much bigger is a WAV than an MP3?
A CD-quality WAV (16-bit / 44.1 kHz) is about 10.6 MB per minute: roughly 4.4 times a 320 kbps MP3 and 11 times a 128 kbps MP3. A 24-bit / 48 kHz WAV is about 17.3 MB per minute.
Should I upload WAV or MP3 to Spotify?
Upload WAV through your distributor. Spotify and the other stores make their own compressed streams from your file, so a WAV gives them the best source. An MP3 upload, where a distributor accepts one at all, means the store encodes an already lossy file a second time.
Can I email a WAV file?
Often not at full resolution. A 4-minute 24-bit / 48 kHz WAV is about 69 MB, well over the attachment limits of common email services such as Gmail's 25 MB. Send a link to the file instead.
What bit depth and sample rate should my WAV be?
For review and for delivery to the client or a mastering engineer, keep the session's own resolution, often 24-bit / 48 kHz. For distribution, use what your distributor asks for; TuneCore, for example, asks for 16-bit / 44.1 kHz.
Is AIFF better than WAV?
No. Both normally store uncompressed PCM audio, so a WAV and an AIFF of the same render sound identical. The differences are the container and metadata support; use whichever your tools and clients prefer.
More guides
- How to send mixes to clients →
What file to send, why links beat attachments, and how to get timestamped notes.
- Limiting revision rounds →
What counts as a round, how many to include, and contract wording that holds.
- What are stems? →
Stems vs multitracks, common layouts, and how to export and deliver them.
- Work-for-hire contract template →
A free template to copy, plus the clauses that keep your rights, your credit, and your cheque.
- Music invoice template →
A free invoice for mix and master work: songs, extra rounds, stems and deposits.
- What is lossless audio? →
WAV, FLAC and ALAC vs MP3, file sizes, streaming services, and why reviews should be lossless.
- What is gapless playback? →
Where gaps between tracks come from, Spotify and Apple Music settings, and how to deliver and review a gapless album.
- Mixing vs mastering →
What each stage does, what files go in and out, how to prep a mix for mastering, and streaming loudness.
- Split sheet template →
What a split sheet records, composition vs master points, when to sign, and a free template to copy.