Guides · Workflow

Mixing vs mastering: what's the difference?

What each stage does to the audio, what files go in and come out, how revisions differ, how to prepare a mix for mastering, and when one engineer should do both.

By , product designer & front-end engineer · Updated November 2026

Mixing balances the individual tracks of a song into one stereo file. Mastering takes that finished stereo file and prepares it for release. Mixing works on many tracks and makes the creative decisions. Mastering works on one stereo file per song and makes small, global ones: final tone and level, consistency across a record, and the delivery formats each outlet needs.

What is mixing?

Mixing is where the recorded parts become a song. iZotope's guide to mixing and mastering describes it as "balancing individual tracks in a session (like vocals, drums, guitars)." In practice that means:

  • Balance: the level of every part against every other part, often automated through the song.
  • Tone: EQ and compression on tracks and groups so parts sit together instead of fighting.
  • Space: panning, reverb and delay to place each part left to right and front to back.
  • Arrangement calls: muting a double, riding a vocal, building the last chorus.

The input is the multitrack session or a set of stems. The output is a stereo mix file, plus any alternate versions the project needs (instrumental, a cappella, TV mix) and often stems. See our guide to delivering stems for that part of the job.

What is mastering?

Mastering is the last creative and technical step before release. Berklee's career guide says mastering engineers "make the final adjustments to a piece of recorded music before it's released," and iZotope adds that they "predominantly work with a single stereo track." A mastering engineer typically:

  • Adjusts overall EQ and dynamics so the song translates on earbuds, car speakers and club systems.
  • Sets the final level and controls true peaks so the file survives encoding without clipping.
  • Makes an album hang together: matching level and tone across songs, and setting the gaps and transitions between them.
  • Produces the release formats: high-resolution WAVs for distribution, a DDP image for CD replication, and sometimes vinyl premasters.
  • Can catch problems. Sound On Sound's piece on what mastering engineers do calls a human mastering engineer "a safety net," able to "pick up red flags like inter-sample peaks."

The same article makes the point most artists don't expect: "If your mix sounds right as it is, a good mastering engineer won't change anything."

Mixing vs mastering at a glance

MixingMastering
Works onThe multitrack session or stemsOne stereo mix per song
Main jobBalance, tone, space, arrangementFinal tone and level, album consistency, release formats
Size of changesLarge, per elementSmall, applied to the whole song
Typical revisionsSeveral rounds, specific (“vocal up in the bridge”)Fewer, global (“a touch brighter”, “song 3 is louder than song 4”)
DeliversStereo mix, alternate versions, stemsRelease-ready WAVs, DDP image, vinyl premasters

How revisions differ between mixing and mastering

Mix revisions are where most of the back-and-forth happens, because the mix is where the creative choices live. A client might ask for the snare louder in the verses, wider guitars and no vocal effect in the last chorus, all in one round. That's why many mix engineers set a number of included rounds in their quote and charge for extras; more on that in limiting revision rounds.

In most projects, mastering revisions are fewer and broader: a song a little too bright, an album where track 3 jumps out, a fade that's too short. If a client asks the mastering engineer to bring a vocal up, that's a mix note, and the fix is a revised mix, not a heavier master.

How to prepare a mix for mastering

Abbey Road's mastering engineers publish a checklist for preparing a mix for mastering. The first three points come from it; the last two are common practice:

  1. Leave headroom. Abbey Road: "Leave at least 2 to 3 dB of headroom on the rendered file." The mix shouldn't peak at 0 dBFS.
  2. Take compression and limiting off the final render. Abbey Road advises leaving "the final compression off when rendering" and sending the file without limiting. If bus compression is part of the sound, ask the mastering engineer whether they want a version with it and one without.
  3. Bounce at the session's own resolution. Render at the sample rate and bit depth you mixed at, as a WAV; their example is "24-bit / 48 kHz or higher." Don't convert down for the mastering engineer.
  4. Include a reference. If the client approved the mix from a loud, limited version, send that too, so the mastering engineer knows what they've been hearing.
  5. Name files so they can't be confused. Song title, version and date, for example Song-Title_Mix-v4_2026-11-05.wav, and say which version is approved. There's more on this in how to send mixes to clients.

How loud should a master be for streaming?

Loud enough for the music, not as loud as possible. Most major streaming services measure loudness in LUFS, using the ITU-R BS.1770method (the ITU calls the unit LKFS), and turn loud tracks down to a common level. Spotify's loudness normalization page says: "We adjust tracks to -14 dB LUFS, according to the ITU 1770 standard." Premium listeners can also choose Loud (-11 LUFS) or Quiet (-19 LUFS), and listeners can switch normalization off.

Spotify advises keeping true peaks "below -1dB TP (True Peak) max." For masters louder than -14 LUFS integrated, it advises below -2 dB TP "to avoid extra distortion." Apple Music's Sound Check is widely reported to normalize to about -16 LUFS (reported by Production Expert, not Apple).

On services that normalize, a master crushed for loudness gets turned down like everything else. It keeps only the cost: lost dynamics. Spotify also notes that you only need to send "one high-quality stereo master per track."

What is a DDP image?

A DDP image is the standard file set for sending a CD master to a replication plant. DCA, which maintains the format, says it gives "a consistent and complete description of the input media for use in glass mastering of CD." In practice it's a folder of a few files: the audio as one image file, a PQ file with track starts and ISRC/UPC codes, optional CD-Text, and usually a checksum file so the plant can confirm nothing changed in transit. Streaming-only releases don't need one.

Can the same engineer mix and master?

Yes, and many engineers do, especially on independent releases with budgets that don't stretch to two people. The trade-off is perspective. After days inside a mix, the mixer can start hearing what they meant to do rather than what's coming out of the speakers. A separate mastering engineer hears the song fresh, in a different room and on a different monitoring chain. Sound On Sound's "safety net" point is partly about that.

If you do both, put time between them. Finish the mix, get it approved and leave it a few days. Then master it as if someone else had mixed it, on the same checklist you'd want from a client.

Frequently asked questions

Do I need mastering if my mix sounds good?

Usually yes, for a release. Even a great mix benefits from final level, peak control and the release formats mastering produces, and an album needs its songs matched to each other. A good mastering engineer may change very little, or nothing, in a mix that already works.

Which comes first, mixing or mastering?

Mixing. Mastering works on the finished stereo mix, so the mix has to be approved before mastering starts. Changes to individual parts go back to the mix.

Can mastering fix a bad mix?

Only a little. Mastering can adjust overall tone and level, but it can't rebalance parts inside the stereo file. If the vocal is too quiet or the low end is muddy, the fix is a mix revision.

How loud should my mix be before mastering?

Not loud. Leave at least 2 to 3 dB of headroom, keep the mix from peaking at 0 dBFS, and take any limiter off the mix bus before you bounce. Loudness is the mastering engineer's job.

What sample rate and bit depth should I send for mastering?

The session's own sample rate, at 24-bit or higher, as a WAV. Don't convert to 44.1 kHz or 16-bit for the mastering engineer; they make the release formats from your highest-resolution file.

What's the difference between a mix engineer and a mastering engineer?

The mix engineer builds the sound of the song from the individual tracks. The mastering engineer finishes the stereo mix for release and checks it on a different monitoring chain. Some engineers do both jobs; on bigger projects they're usually different people.

Run mix and master rounds in one place.

Mixrounds tracks every revision round against the quote, keeps the client's timestamped notes on the waveform, and delivers the final files from the same link.

Invite-only · onboarding in small batches · no credit card